mail@spp.co.uk        01992 410333

Nationwide Delivery

Specialised Panel Products SPP
    Specialised Panel Products SPP

      Concrete Formwork

      Concrete Formwork Plywood

      Concrete Formwork Panels

      

      As importers, we are set up to deal in commercial volumes to companies (full packs only)

      Plywood overlaid with a smooth coating for concrete formwork or shuttering

      We offer dark brown smooth phenol, MDO (medium density overlay) or polypropylene faced panels

      Edges sealed in water-proof paint to prevent moisture ingress

      Plywood overlaid with a smooth coating for concrete formwork or shuttering

      We offer dark brown smooth phenol, MDO (medium density overlay)

      or polypropylene faced panels

      Edges sealed in water-proof paint to prevent moisture ingress

      Plywood for Concrete Formwork

      Phenol Faced Birch Plywood

      Birch throughout plywood core, exterior glue bonded, edges sealed
      The smooth phenol surface is smooth, glossy and hard. It resists abrasion, it is weather and moisture proof and resists commonly used chemicals, dilute acids and alkalis. The surface is easy to clean with water or steam. Can be re-used many times.

      Standard Panels
      Thickness: 9mm, 12mm, 18mm, 21mm
      Board Size: 2440 x 1220 or 1525 x 3050
      Packing: 9mm (44) 12mm (33) 18mm (22) 21mm (19)


      Available to Special Order

      6.5mm, 15mm, 24mm, 27mm, 30mm, 35mm, 40mm


      1250 x 2500 / 2750 / 3000 / 3340 / 3660
      1500 x 2500 / 3000
      1525 x 2750 / 3050 / 3340 / 3660
      1830 x 3050 / 3340 / 3850
      2150 x 3050 / 3340 / 3850


      Technical Specifications

      Phenol Overlay: Paper impregnated with phenol resin that is moisture and chemical resistant. Does not crack. Available in 120g/m2 and 240g/m2


      Edge Sealing: Exterior acrylic paint to prevent moisture ingress

      To match phenol face colour


      Plywood Bonding: Weather resistant glue according to EN 314-2/class 3


      Weight: 640-700kg/M3

      Smooth Faced Plywood for Formwork


      MDO Plywood

      (Medium Density Overlay)

      MDO gives a matt surface finish to the struck concrete and minimises grain pattern transfer. Spruce MDO is light weight and easy to handle on site.

      Known as Wisa-Form MDO panels


      Standard Panels

      18mm 2440 x 1220 packs (50) sheets


      Technical Specifications

      MDO Face: Resin impregnated craft paper. Must be oiled twice prior to first use and once before every other use.


      Reverse: Dark brown phenolic film balancer


      Edge Sealing: Light brown water resistant paint


      Plywood Bonding: Weather resistant glue according to EN 314-2/class 3


      Weight: 450kg/M3

      Wisa MDO plywood



      Poliform Plywood

      Riga Poliform

      Birch plywood core overlaid on both faces with a special composite material, that is ecologically safe and recyclable.

      Produces a superior appearance to the concrete surface and when properly used the manufacturer estimates 100+ uses. Heavy duty formwork plywood.


      Standard Panels

      18mm 2440 x 1220 in grey


      Available to Special Order

      9mm  12mm  15mm  21mm  24mm


      1220 x 3050
      1250 x 2500 / 3000 / 3340 / 3660
      1500 x 2500 / 3000
      1525 x 2440 / 3050 / 3340 / 3660


      Light Green  Natural  Orange  Red  Yellow  Green  Blue


      Technical Specifications

      Coating: 1.6mm thick composite of wood fibres and polypropylene. It resists various kinds of damage, will release well and maintains a long performance life. Bonded with C4 class glues according to EN 12765. UV resistance is average to good.


      Edge Sealing: Exterior acrylic paint to prevent moisture ingress

      To match face colour


      Plywood Bonding: Weather resistant glue according to EN 314-2/class 3


      Weight: 680-700kg/M3

      Heavy Duty Concrete Formwork Plywood

      Not offered as a decorative panel. Colours are for site identification purposes or corporate branding considerations.

      Grey Riga Poliform Plywood



      Wisa Form Elephant Plywood

      Wisa-Form Elephant

      Birch plywood core with wood-plastic composite face and a phenol reverse


      Standard Panels

      18mm 2440 x 1220 and 21mm 2440 x 1220


      Available to Special Order

      Maximum size: 1525 x 3660. Other sizes at customer request


      Technical Specifications

      Face: 1.6mm light grey special plastic coating


      Reverse: dark brown 220g phenol (Optional: plastic coating on both sides)


      Edge Sealing: Grey water resistant paint


      Plywood Bonding: Weather resistant glue according to EN 314-2/class 3


      Weight: 680-700kg/M3




      Cut to size & CNC machined panels. All cut panels are edge sealed.

      Allow 10-14 working days for our cut to size service, depending on volumes and complexity


      Popular Formwork Systems

      Doka Topec

      Doka Frami

      Doka Framax

      Peri Sky Deck

      Peri Trio

      Cutting Service

      We stock a wide range of standard and specialist formwork and shuttering panels. For non standard requirements we are able to cut, machine and edge seal in the UK from our grounded stock or provide forward shipments direct from the mill.

      We can offer the panel you require to suit your budget and the required concrete finish. Raw panels for standard work or overlaid panels for high quality projects. We supply a range of panels and components to recognised industry names.

      Data sheets and strength tables are available. Contact us for more information.

      As importers we are set up for commercial volumes. Standard sizes and special items in full packs only.


      For cut to size enquiries we can accommodate smaller volumes. Please contact us to discuss.


      Special items would be ordered from the mill on a 7-10 week lead-time.

      Share by: